RESUMO
Based on the characteristic of high speed line scanning for CCD in transient spectrum detection, a method of transient spectrum detection with array CCD is presented. The high speed line scanning with array CCD was realized by changing the mode of charge transfer. In order to explore the feasibility of this method, a fast detection system of single point based on linear CCD was designed and fabricated. Seven different LED pulses were measured when the system worked at fast detection mode of single point and normal mode respectively. The results demonstrate that the method of fast detection of single point based on linear CCD is feasible, and the rate of single point detection reaches up to 20 MHz. Thus, in theory, it was proved that transient spectrum detection with array CCD by changing the mode of charge transfer is also feasible.
RESUMO
Based on the spectral characteristic of the detonation temperature, the present paper presents a measurement system of transient multi-wavelength pyrometry with the theory of multi-wavelength thermometry. The FPGA was applied as the hardware developing platform and the high-speed linear CCD was utilized. Each module was controlled by FPGA to achieve the process of real-time data acquisition, storage and transmission. Using the multiple regression analysis method, the dynamic spectral waveforms were calculated. The two laser spectral lines, 630 and 532 nm, were used to calibrate the corresponding pixel sequence numbers and the No. 175 and No. 270 were confirmed. In this paper, the halide tungsten light was measured. The results show that the system can sample continuous spectrum signal at several different times; the CCD can stably work with 40 MHz clock and the frame scanning frequency can achieve 73 kHz.
